BK PRECISION 1651A CALIBRATION and BK PRECISION 1651A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BK PRECISION 1651A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   BK PRECISION 1651A   Description / Specification:   Spec Sheet 
BK PRECISION 1651A Triple Output DC Power Supply

The B+K Precision 1651A is a Triple Output DC Power Supply with two variable 0 to 24 VDC outputs capable of supplying 0 to 500 mA, and one fixed 5 VDC output capable of supplying up to 4 A. Connect outputs in series for higher voltage or connect in parallel for higher current output (switch selectable). Voltage and current metering is provided two analog displays. This unit is fully protected against short circuit, overload, and reverse polarity. Specifications. Number of Outputs: Three (1 variable, 2 fixed). Output Voltage: 0 to 24 VDC (A & B), 5 VDC (C). Output Current: 0 to 500 mA (A & B), 4 A (C). Constant Voltage Operation Line Regulation: < 0.01% + 3 mV (main), < 5 mV for line fixed supply. Constant Voltage Operation Load Regulation: < 0.01% + 3 mV (main), < 10 mV fixed. CV Recovery time: 100 µS. CV Ripple & Noise (5 Hz to 1 MHz): <2 mVrms (<= 5 mVrms for fixed output). Constant Current (CC) Adjustable Current Range: 5% to 100%. CC Line Regulation: < 0.2% + 6 mA. CC Load Regulation: < 0.2% + 3 µA. CC Current Ripple: < 3 mA rms. Display: dual analog. Voltmeter Accuracy: 2.5% to full scale. Ammeter Accuracy: 2.5% to full scale. Overload Protection: Current limiting, Reverse polarity, Overvoltage, Short circuit.



 

Standard Calibration $155.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BK PRECISION 1651A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a component, link or network will operate.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Ringing
Ringing is an unwanted oscillation of a voltage or current.

Please contact us for your BK PRECISION 1651A CALIBRATION and/or BK PRECISION 1651A Triple Output DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: